Cutting LyndsayMakes Iron On Placement Guide on the ScanNcut

I found this great tool mentioned on one of the ScanNcut Facebook groups. It is now suitable for cutting on the ScanNcut. You can purchase the file from LyndsayMakes. If you prefer you can also purchase it ready made.

You will need Canvas Desktop, 12x24 inch mat, plastic sheets to cut from and a deep cut blade if you are usong a CM series model. 

I cut these from Birch 32x47 stencil plastic. It was cut on my SDX1000.

This is just as easily cut on the CM series of machines. You just need to do some testing for the right cut depth and pressure.


I did not trim the plastic before cutting but you do need to ensure it sits well with your rollers. So I laid mine with the left side clear of the roller and the right side under the roller. If the roller straddles the plastic I have found that it can slip and the second cut can be slightly off centre.

The pattern includes the Guide, the Pocket Guide and two Rulers, one for each guide. Using a half cut you can easily see the markings.

Using the guide you can easily place your htv in the correct position.

Here is a video on cutting the guide on an SDX1000.